DIALux evo

[alkrymov]

Вышла версия 6.2.

In the following you find an overview of the new features and the improvements in this version:

Improvement of daylight calculation:
• The transmission diagram has been visually improved. The theta angle is now documented in the printouts.
• The part “daylight information” has been added to the room summary printouts.
• Calculation surfaces for daylight factors are showing the average value of the daylight factors.
• The layout of daylight factor calculation surface outputs has been reworked.
• Openings as windows and doors can now be placed via drag & drop also in 2D.
• DDLS files for façade systems can now be placed via drag & drop.
• Roof lights are now aligned according to the shape of roof when being copied.
• The progress of calculation daylight and façade systems is shown in a more detailed way.
• The calculation of the refraction index works correctly now, also for glass type “no glass”.

Performance boost for loading projects :
• Projects that are stored with DIALux evo 6.2 or above can be loaded up to 50-80% faster than before. The exact result depends on the type of the saved project.

Improvements in road lighting:
• New IES file import assistant: Geometric dimensions for luminaire case and light output can be entered. The user is guided by a visual assistant.
• Road profiles for documentation can be selected during the planning.
• Results which fulfil and those which do not fulfil any normative condition are now highlighted in the result table.
• According to EN 13201:2015, DIALux provides an optional TI calculation of C and P classes, if desired.
• The optimization now uses 5 parameters as there are pole distance, light centre height, boom angle, light overhang and now also the minimal energy consumption needed. For this optimization, DIALux uses all equipment information given for a luminaire.
• The layout of road planning printouts has been improved to fit to one page for most cases.

Documentation of luminaire positions:
• The printouts show luminaire coordinated within the ground plan as well as in a position table.
• The luminaire orientation of C0/G0 planes are documented in CAD and ground plan.
• Luminaires are systematically numbered to be easier found in table and ground plan.
• Users can freely define a coordinate system for each room which is used as reference point for documenting luminaire positions.

Improvement of lamp tool:
• The display of the correlated colour temperature (CCT) has been improved. In many cases the given spectrum did not fit to the CCT. The CCT is now always been taken from luminaire data.
• The declaration of the colour rendering index (RCI) has been improved.
• Different technical terms as well as their translation have been improved.
• The way of how to select luminaires and luminaire arrangements in the lamp tool has been changed.
• Implausible CCT and CRI values that are not physically covered by a black body radiator are caught and explicitly handled for the documentation.
• DIALux evo now enables the user to create black body spectra for a given CCT in case no measured spectrum is given.
• The layout and usability of the lamp tool have been improved.

Bugfixes:
• In addition to those developments, several minor bugs have been solved.


Kind regards,
Your DIAL Support Team

Странная политика у DIAL конечно. Для полноценного использования evo осталось допилить совсем чуть-чуть:
1. Поправить шкалу псевдоцветов
2. Изменить цвета светильников при экспорте в пдф (сейчас совсем круто - желтым на белом фоне)
3. Добавить горячих клавиш
4. Ну и так, по мелочи...

А они все продолжают не в том направлении

[T0L1K]

Немного про EVO и BIM.
В версии 7.0 доступен ИМПОРТ проектов созданных с применением BIM. Ево понимает такие вещи как стены,перекрытия, объекты, двери и окна. С текстурами пока проблемы так же как (вроде, но это не точно) со светильниками. Экспорт проектов будет доступен в будущем. Но uld файлы светильников уже отвечают всем требованиям технологии BIM.
Появилась возможность производить упрощенный расчет без учета отражений и\или без учета объектов.
Доступны американские системы единиц.
В 7.1 скорей всего будет возможность РАЗДЕЛЬНОГО расчета помещений, т.е. видимо каждая сцена для своего помещения как в обычном диалюксе.
В 7.1 точно не будет возможности создания видеороликов.
7.0 выйдет 26-30марта, 7.1 в июле-сентябре.

Вроде ничего не забыл